Smartek-systems SVS-1 User Guide-Part E Manuel d'utilisateur

The SmarTek Video Detection System (SVS-1)User Guide-Part EUsing a Mouse and Monitor to Setup the SVS-105 May 2011

Scenario 1 Set 4 Output Relays For a Type 170/2070 Card File InterfaceSelect Detector Interface and Route Relays:1) Click the Detector Interface but

Scenario 1 (Con’t) Set 4 Output Relays For a Type 170/2070 Card File Interface Select Detector Interface and Route Relays:1) Click the Detector Inter

Select Detector Interface and Route Relays:1) Click the Detector Interface button to select the type of detector/controller interface to be used ( Ty

Scenario 2 Set 2 Output Relays per Card for a 170/2070 ControllerSelect Detector Interface and Route Relays:1) Click the Detector Interface button t

Scenario 2 (Con’t) Set 2 Output Relays per Card for a 170/2070 ControllerSelect Detector Interface and Route Relays:1) Click the Detector Interface

Scenario 2 (Con’t) Set 2 Output Relays per Card for a 170/2070 ControllerSelect Detector Interface and Route Relays:1) Click the Detector Interface

Scenario 3 Set 4 Output Relays to BIU #1 Card File Select Detector Interface and Route Relays:1) Click the Detector Interface button to select the t

Scenario 3 (Con’t) Set 4 Output Relays to BIU #1 Card FileSelect Detector Interface and Route Relays:1) Click the Detector Interface button to select

Scenario 3 (Con’t) Set 4 Output Relays to BIU #1 Card FileSelect Detector Interface and Route Relays:1) Click the Detector Interface button to select

Scenario 4 Set 4 Output Relays to BIU #1 Card FileSelect Detector Interface and Route Relays:1) Click the Detector Interface button to select the ty

Setting up the SVS-1 using a Mouse and Video Monitor (No PC Required) Overview.The SVS-1 processor cards may be setup using only an NTSC video monitor

Scenario 4 (Con’t) Set 4 Output Relays to BIU #1 Card FileSelect Detector Interface and Route Relays:1) Click the Detector Interface button to selec

Scenario 4 (Con’t) Set 4 Output Relays to BIU #1 Card FileSelect Detector Interface and Route Relays:1) Click the Detector Interface button to selec

Scenario 5 Set 2 Output Relays to BIU #1 Card FileSelect Detector Interface and Route Relays:1) Click the Detector Interface button to select the ty

Scenario 5 (Con’t) Set 2 Output Relays to BIU #1 Card FileSelect Detector Interface and Route Relays:1) Click the Detector Interface button to selec

Scenario 5 (Con’t) Set 2 Output Relays to BIU #1 Card FileSelect Detector Interface and Route Relays:1) Click the Detector Interface button to selec

Scenario 6 Set Output Relays For SDLC output from BIU#1Select Detector Interface and Route Relays:1) Click the Detector Interface button to select t

Scenario 6 (Con’t) Set Output Relays For SDLC output from BIU#1Select Detector Interface and Route Relays:1) Click the Detector Interface button to

Scenario 6 (Con’t) Set Output Relays For SDLC output from BIU#1Select Detector Interface and Route Relays:1) Click the Detector Interface button to

Set Output Video Text DisplayThis display is used to enter descriptive text which may be set to show on the output video image. Upon opening this dis

SVS-1 Banner DisplayThis display shows the SVS-1 Current ID, the Processing Hardware Revision Number and the current Software Version Number. Click t

Mouse and Monitor SVS-1 Setup (No PC Required)Click SetupPlug Mouse into Serial or USB PortTop LevelVideo Out DisplayMain SetupDisplayDraw Line ZonesD

Top Level and Main Setup DisplaysAfter connecting the mouse, the Top Level navigation buttons appear on the output video image. From the display, the

Draw Line Zones Set Line Zone Position, Size and Phase Group:1) Click the LZ# button to select the line zone to draw. If the previous line zone has

Draw Line Zones Phase assignment Codes:Ph-1LPh-6TPh-6RPh-3LPh-8TPh-8RPh-5LPh-2TPh-2RPh-7LPh-4TPh-4RPh-9LPh-14TPh-14RPh-11LPh-16TPh-16RPh-13LPh-10TPh-1

Set Line Zone ParametersSet Line Zone Parameters:1) For most installations using the Default parameters results in excellent performance. To set all

Setting Output - Example Scenario SummaryFrom the Main Setup display, proceed to the Set Output display by clicking the Set Output button. This displa

Setting Output Example Scenario Summary (Continued)4) BIU #1 Card file Detector/Controller Interface with 4 Relays per SVS-1 card, Slot 4 used, and 3